TRIGGER 4 PLUS Wireless Accessory Control System
Part Number: 2100 (Currently Out of Stock ETA December)
TRIGGER 4 PLUS Wireless Accessory Controller
The TRIGGER 4 PLUS Wireless Accessory Controller substantially saves installation time of your electronic accessories! Eliminate the need to run wires under the dash or through the firewall of your vehicle when wiring accessories. Includes an RF remote control for wirelessly activating installed accessories from inside or outside the vehicle. In addition, fused circuits with LED indicators notify you of active circuits or blown fuses.
The included battery-powered RF remote utilizes a universal mounting system that will accommodate round surfaces as well as flat surfaces. There is an ambient back-light (illuminating the space around the switches momentarily) and it can be re-programmed for security or used with additional remotes; Several TRIGGER 4 PLUS Wireless Accessory Controllers can be used together to control up to 24 accessories. When mounted to a UTV roll bar, the buttons on the remote are more easily accessible than dash switches. There is no straining against seat belts to reach the dash, just a quick reach up to flip a switch on the remote.
We get asked this a lot, so...Please do not swap higher capacity fuses into lower capacity circuits. Each circuit is engineered to handle only the stated load, and doing so will damage the TRIGGER and void its warranty.
What is a TRIGGER Controller?
Learn more about this simple yet powerful accessory here in our video:
Extend Control With The TRIGGER ACS Plus app for iOS and Android Devices!
The Bluetooth App will control on/off and dimming functions as well as flashing when used with LED or conventional lighting. Of course, it's quick and easy to set up and allows for extended control and user customization. Set switch functionality to either standard rocker or momentary, and edit individual accessory names.
Use the app to “TRIGGER” lights from outside the vehicle whenever you might need to activate an accessory on demand.
Save time, simplify your installs, and get out on the trail: Pull The TRIGGER!
A few additional features:
- Accepts 12-24 Volt input
- Two 10 amp fused circuits w/12-24 Volt output
- Two 30 amp fused circuits w/12-24 Volt output
- Includes 4 wire harnesses with waterproof connectors: two 10 gauge and two 12 gauge
- Wireless Battery Operated RF remote switch module with ambient backlight
- You can control it from your mobile device with our free TRIGGER ACS PLUS App for iOS/Android!
- Comes with switch labels too!
- Free 3-year warranty that covers manufacturing defects
- Built in fuses with o-ring sealed cover: two 30 amp and two 10 amp
- High intensity LED’s indicate circuit status, blue for circuit on, red for blown fuse
- Waterproof case design, withstands temps from below freezing to 250 degrees F
Please note: Due to Federal regulations surrounding lithium battery cells, any TRIGGER Controller products shipping by air (FedEx 2nd Day or FedEx Overnight services) will have their batteries removed before shipment. For replacement cells please purchase CR2025 for the 4 PLUS controller, and CR2032 for the 6 SHOOTER controller...these are readily available at most brick-and-mortar and online shops.
Click here to view the Quick Start Guide for TRIGGER 4 PLUS
Need a longer wire run? Additional TRIGGER Wiring Harnesses are also available, click here to shop.
Please note: Due to Federal regulations surrounding lithium battery cells, any TRIGGER Controller products shipping by air (FedEx 2nd Day or FedEx Overnight services) will have their batteries removed before shipment. For replacement cells please purchase CR2025 for the 4 PLUS controller, and CR2032 for the 6 SHOOTER controller...these are readily available at most brick-and-mortar and online shops.
