Skip to content
FREE SHIPPING ON ORDERS $100+ (Continental USA ONLY)
FREE SHIPPING ON ORDERS $100+ (Continental USA ONLY)
Rear Bumper LED Reverse Lights for Jeep Wrangler JL

ORACLE Lighting Rear Bumper LED Reverse Lights for Jeep Wrangler JL

$120.15 - $120.15
$120.15
$120.15 - $120.15
$120.15
  • Product Description
  • Features
  • What's Included
  • Installation

  • ORACLE Part# 5874-504

    Not satisfied with the light output of your Jeep JL backup lights? A common complaint is low visibility when backing up in a Jeep JL because the factory reverse lights (even with LED tail lights) do not produce enough light for the backup camera to work well in the dark.

    ORACLE Lighting has developed a reverse light that seamlessly integrates into the bumper reflector area to provide over 1000 additional lumens when backing up in a Jeep JL. Replace the factory bumper reflectors with high-output replacement auxiliary LED reverse lights from ORACLE Lighting. These durable lights feature an aluminum housing with a PMMA lens, and these compact lights pack a big punch with a total of 22 high-powered LEDs to improve your Jeep JL bumper reverse lights.

    Ready to install out of the box, this kit ensures you will have rear visibility in your Jeep JL when it matters! The installation uses factory mounting hardware, and these lights tie into the reverse light wiring with the included T-taps.

    We also offer an easy-to-use plug & play wiring adapter for a faster installation. ORACLE Part# 5879-504

    PATENTED DESIGN: USD1004181S1



    It is highly recommended that Wrangler JL's convert their stock halogen reverse light bulbs in the tails to LED for best performance and functionality of these ORACLE Bumper LED Reverse Lights. They can be found here


  • Features:
    - Direct replacement lamp using existing hardware
    - Taps into the existing reverse light power source without error code
    - Clean design with OE fitment and appearance
    - 11x 1W LEDs in each for 1,000Lm output (Raw Lumens)
    - Clear PMMA lens, cast aluminum housing with powder-coat finish
    - Optic-focused wide beam pattern for an extended field of view
    - 2 Year Warranty


    Note:
    -     May require some modification when installing into factory steel bumper

    Testing and Performance Information     [CLICK HERE]

  • (2) Rear Bumper LED Reverse Lights for Jeep Wrangler JL


    PATENT INFORMATION: USD1004181S1





Customer Reviews

Based on 7 reviews
71%
(5)
29%
(2)
0%
(0)
0%
(0)
0%
(0)
R
Randy VanDyke
Wow…are these bright!

Bought a set of these for my Moab…I’d heard there would be a noticeable difference, but wow, was I impressed. The stock backup lights are pretty dim, these make it like daylight.

J
Jose Carlos
Red fog rear lights.

I would like to have them in red colour, to be used as rear fog lights. Do you expect to produce them?
Many thanks in advance.

C
Customer
Really a nice add on

Great back up lights for my 2018 JL . The install would be alot easier if you could use some adhesive to secure the new back up lights . Trying to get that 7 mm screw back in was and is NIGHTMARE. Other wise they are great lights .

R
Ralph Saunders
Great addition to my Rubicon

If you have a JL with a steel bumper, these lights will replace the reflectors ad really light up what is behind you when you shift into reverse. They are a must have. They are a very elegant and easy way to fix the anemic stock backup lights on the JLU.

D
Dennis Reiter
Clean back up lights, easier way to install them

Take your muffler off. Loosen exhaust clamp, disconnect exhaust rubber mounts or take complete mounts off on both sides, 4 bolts.
Then use a thin wall 7mm deep socket with 8 in extension with flash light you can reach the 7mm screw holding the red reflectors on both sides. New light on drivers side had to be filed to fit. Then tape the 7mm screws to the socket and install into back of new lights . Then continue to wire per instructions. No need to remove steel bumper. Love the back up lights, clean look.

12

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare